Safety Instructions - GLP impression spot one Instruction Manual

Table of Contents

Advertisement

1.1

Safety Instructions

1. Make sure that before powering up the fixture, the fans and air inlets are
clean and not blocked by anything.
2. Before powering up the fixture, ensure that the moving head part of the
fixture can rotate unhindered through its full range of movement.
3. A safety distance of at least 0.5 m to any easily flammable material (e.g.
decoration material) must be adhered to.
4. Attention! Don't touch the device during operation. Parts of the fixture can
become hot and can cause injuries and / or damages.
5. Use only one DMX Input / Output at the same time.
6. Never look directly into the beam of light or one of the LEDs. Never use
optical apertures with a distance less than 0.5 m to observe the beam of
light. LED Class 2M. Not following these precautions can result in serious
injury to your eyes and in particular, your retina.
7. To ensure proper operation, you must also follow the installation guide
described in chapter 2 of this manual. Operating the
without suitable mounting devices can increase the risk of an accident.
8. The
I
m
p
r
I
m
p
with no specific carrying handles. Care needs to be shown when handling
the fixture to ensure that no unnecessary damage should occur. Fragile
areas include the LCD display and cover on one side arm and the front
bezel. Pressure in these areas could result in damages which will not be
covered by the standard warranty.
9. Repair, maintenance and installation work should only be performed by
qualified or GLP certified staff. You need to pay attention to the common
GLP
German Light Products GmbH
(Instruction version 1.93) / from software version 1.52
The
I
m
p
r
e
s
s
i
o
I
m
p
r
e
s
s
i
o
To guarantee smooth operation, it is necessary to follow the
following instructions.
The manufacturer of this device will not take responsibility of
damages through any disregard of the information in this user
manual. Warranty claims will also be cancelled in the event of
the system casing being opened.
Attention: LED Class 2M can cause injuries of your eyes even
without optical instruments in front of them or within a distance
of less than 0.5m and short exposure time.
Avoid direct radiation to your eyes!
e
s
s
i
o
n
S
p
o
t
o
n
e features a unique small and lightweight design
r
e
s
s
i
o
n
S
p
o
t
o
n
e
n
S
p
o
t
o
n
e is an advanced technology product.
n
S
p
o
t
o
n
e
5
I
m
p
r
e
s
s
i
o
n
S
p
o
t
I
m
p
r
e
s
s
i
o
n
S
p
o
t
o
n
e
o
n
e

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents