Care And Maintenance; Fault Status - Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual

11

Care and Maintenance

The V-Green 165 is both reliable and robust in harsh environments.
However, this product does contain electronics that are cooled by a fan
mounted to the V-Green 165. In order to ensure optimum reliability of
this product, it is recommended to clean the fan inlet on the back of the
V-Green 165 once a month. It is also important to keep this area free of
large debris such as leaves, branches, mulch, plastic bags, etc.
12

FAULT Status

While the FAULT LED is illuminated the motor will not run, upon clearing the fault, the
motor may automatically resume running depending on where in the schedule the FAULT
occurred. This may cause personal injury or damage to the equipment.
The paragraphs below illustrate the possible faults that can occur with
the V-Green 165. If the V-Green 165 does not restart automatically fol-
lowing the FAULT, cycle ac power to the V-Green 165 and wait five (5)
minutes. If this does not correct the situation, please contact Customer
Service at 1-800-262-6484.
The V-Green 165 reads the FAULT status and provides feedback to the
user via the FAULT LED. The V-Green 165 will illuminate the FAULT
LED when a FAULT is present. The V-Green 165 will stop and remain
OFF when the FAULT is present. Once the FAULT is cleared, if the V-
Green 165 was previously running, it will automatically resume running
the normal schedule.
25
v