User Interface Key Pad Overview; Set The Schedule - Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual

6.2

User Interface Key Pad Overview

If power is connected to the V-Green 165 motor, pressing any of the following buttons
referred to in this section 6.2 could result in the motor starting. Failure to recognize this
could result in personal injury or damage to equipment.
1. STEP 1 (Set Schedule)
2. STEP 2 (Set Schedule)
3. STEP 3 (Set Schedule)
4. OVERRIDE (Settings)
5. START
6. STOP
6.3

Set the Schedule

If power is connected to the V-Green 165 motor, pressing any of the following buttons
referred to in this section 6.3 could result in the motor starting. Failure to recognize this
could result in personal injury or damage to equipment.
Set the DURATION and SPEED for the V-Green 165 using the keys on
the User Interface. The schedule is based on a 24-hour schedule and
will repeat each day of the week.
The highest speed rating for the V-Green 165 is 3450 RPM and the
lowest is 600 RPM. Unless a new user-defined schedule is entered, the
V-Green 165 will operate based on the following factory default schedule:
è DURATION and SPEED
è DURATION and SPEED
è DURATION and SPEED
è DURATION and SPEED
13
v