Quick Start Instruction; Quick Start Guide (Using Factory Default Schedule) - Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual

• Ability to configure freeze protection temperature.
• Ability to view actual speed and power of the V-Green 165 in real time.
• Ability to adjust the V-Green 165 motor speed in 25 RPM
increments (to fine tune flow for certain pool installations).
• Battery backup to store time setting.
3

Quick Start Instruction

If power is connected to the V-Green 165 motor, pressing any of the following buttons
referred to in section 3 could result in the motor starting. Failure to recognize this could
result in personal injury or damage to equipment.
3.1 Quick Start Guide
The following table describes the factory default settings for DURATION
and SPEED order:
Button
STEP 1
STEP 2
STEP 3
OVERRIDE
Pressing the START key will start the V-Green 165 based on the factory
default schedule.
NOTE: If power is cycled to the V-Green 165 and the user does not
press the STOP key, the V-Green 165 will automatically start and
run the programmed default schedule shown in the chart above. This
feature ensures that the V-Green 165 will re-start in the event of a
power outage.
(Using the factory default schedule)
Duration
(In Hours)
4
4
8
2
5
v
Speed
(In RPM)
3100
2600
1600
3450