Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual page 20

5. Press STEP 2, STEP 3, or OVERRIDE key. Repeat steps 1- 4
to program the corresponding DURATION and SPEED for each
button.
6. Press START to run the V-Green 165 based on the pro-
grammed 24 hour schedule.
7. Pressing the STOP button will stop the V-Green 165.
NOTE: The V-Green 165 can only be set to operate on a 24-hour
schedule. If a user attempts to program a schedule with a combined
duration for all three steps greater than 24 hours, the V-Green 165
software will retain the current STEP time duration only, and will zero
out the other two STEP time settings. As an example, if STEP 1 equals
eight (8) hours, STEP 2 equals nine (9) hours, and STEP 3 equals eight
(8) hours – for a combined 25 hours – the V-Green 165 will retain the
setting for the current Step being programed and zero out the remain-
ing two. For details regarding the set-up of the three steps as part of a
24-hour schedule, see section 6.
7
v