Override - Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual

6.5

OVERRIDE

The V-Green 165 is equipped with an OVERRIDE feature, which can be
engaged to temporarily run at higher or lower speeds ranging between
600 to 3450 RPM. Once the OVERRIDE duration has elapsed, the V-
Green 165 will automatically return to the programmed schedule.
1. Pressing the OVERRIDE key while the V-Green 165 is running will
cause the V-Green 165 to start running in the OVERRIDE mode
at the programmed DURATION and SPEED. The "active LED" for
OVERRIDE will illuminate. The DURATION and SPEED setting
LEDs along with its respective bar graph LED will blink back and
forth at three (3) second intervals.
2. The UP (+) / DOWN (-) arrows allow the user to configure OVER
RIDE DURATION and SPEED. These settings can be changed
while the V-Green 165 is running. These settings are stored each
time the UP (+) / DOWN (-) arrows are pressed.
NOTE: When the OVERRIDE duration ends, the V-Green 165 resumes
the 24 hour schedule at the point in the currently programmed 24 hour
schedule where it normally would be running at that time. The OVER-
RIDE duration will not affect the start or stop times of the 24 hour sched-
ule. For example, if OVERRIDE runs during a period overlapping with a
later part of STEP 1 and an early part of STEP 2, the start time of STEP
3 is not affected.
17
v