Speck pumps EasyFit 1.65 THP Installation, Operation And Service Manual page 17

v
If power is connected to the V-Green 165 motor, pressing any of the following buttons
referred to in section 2 could result in the motor starting. Failure to recognize this could
result in personal injury or damage to equipment.
Note: The START button must be pressed for the V-Green 165 to
operate. The START LED will illuminate after the button has been
pressed indicating the V-Green 165 is capable of operating. Pressing
the stop button will turn off the START LED and stop the motor if
running.
V-Green 165 Features
• Simple user interface
• Digital inputs for compatibility with pool automation systems
• Motor design reduces noise emissions
• UV and rain-proof enclosure
• Freeze Protection
• Manual OVERRIDE
• Compatibility w/ V-Green 270 user interface
(sold as a separate accessory)
• High efficiency electromechanical motor and control design
Benefits of adding an optional V-Green 270
user interface with the V-Green 165 motor
• Ability to conduct field troubleshooting (i.e., view FAULT codes and
real time operating parameters).
• Ability to set a pump running schedule based on a real clock setting
(i.e., must input actual time which then determines pump start and
stop times).
• Ability to remotely mount the V-Green 270 user interface (provides
easy access of user interface depending on pump location).
• Ability to configure prime speed and prime duration.
4