Quick Start Programming - Speck pumps BADU ECOM2/S90 Installation, Operating And Service Manual

M017837080000 REV. January 19, 2011
M017837080000 REV. January 19, 2011
How to Program your 2EZ Speed
How to Program your 2EZ Speed
uick Start
uick Start
A Setting the Clock and Day
A Setting the Clock and Day
• Press Menu
• Press Menu
– Clock Flashing
– Clock Flashing
– Press Enter
– Press Enter
– Hour Digits will be Flashing
– Hour Digits will be Flashing
– Use Up/Down to adjust the digits
– Use Up/Down to adjust the digits
– Use Side to Side   to Navigate thru the fields
– Use Side to Side   to Navigate thru the fields
to adjust minutes as well as AM/PM
to adjust minutes as well as AM/PM
– Select current Day of the Week by using
– Select current Day of the Week by using
the up/down arrows
the up/down arrows
– Press Enter to complete and proceed to setting speeds
– Press Enter to complete and proceed to setting speeds
B Programming Speeds
B Programming Speeds
• While in Menu
• While in Menu
– Low will be Blinking
– Low will be Blinking
– MTuWThF will be illuminated
– MTuWThF will be illuminated
– Set On Time is illuminated
– Set On Time is illuminated
– Press Enter
– Press Enter
– Use Up/Down to Change Time On for Low Speed
– Use Up/Down to Change Time On for Low Speed
Monday thru Friday
Monday thru Friday
– Use Side to Side   to Navigate
– Use Side to Side   to Navigate
– Press Enter
– Press Enter
– MTuWThF will be illuminated
– MTuWThF will be illuminated
– Set Off Time is illuminated
– Set Off Time is illuminated
– Use Up/Down to Change Time Off for Low Speed
– Use Up/Down to Change Time Off for Low Speed
Monday thru Friday
Monday thru Friday
– Use Side to Side   to Navigate
– Use Side to Side   to Navigate
– Press Enter
– Press Enter
– Programming Monday-Friday High Speed
– Programming Monday-Friday High Speed
• Same as above except High will be illuminated
• Same as above except High will be illuminated
– Programming Saturday/Sunday Low Speed
– Programming Saturday/Sunday Low Speed
• Same as above except Days of Week will read SaSu
• Same as above except Days of Week will read SaSu
– Programming Saturday/Sunday High Speed
– Programming Saturday/Sunday High Speed
• Same as above except Days of Week will read SaSu
• Same as above except Days of Week will read SaSu
and High will be illuminated
and High will be illuminated
C using Low and High Speed override
C using Low and High Speed override
• The user can press either the Low or High Speed Override
• The user can press either the Low or High Speed Override
button at any time.
button at any time.
– 60 Minutes will appear on the clock and begin to countdown
– 60 Minutes will appear on the clock and begin to countdown
– Pressing the Override button again will Exit from the
– Pressing the Override button again will Exit from the
override selection and user programming will resume.
override selection and user programming will resume.
– When the 60 minute timer reaches zero, the unit will exit
– When the 60 minute timer reaches zero, the unit will exit
from override mode and user programming will resume
from override mode and user programming will resume
1 2EZ Speed Pool Motor with Programmable Control/Timer
1 2EZ Speed TM Pool Motor with Programmable Control/Timer
TM
Control
Control
TM
TM
1 : AM
1 : AM
MTuWThFSaSu
MTuWThFSaSu
Press Enter to Con rm
Press Enter to Con rm
Low
Low
1 : AM
1 : AM
MTuWThF
MTuWThF
Press Enter to Con rm
Press Enter to Con rm
High
High
1 : AM
1 : AM
MTuWThF
MTuWThF
Press Enter to Con rm
Press Enter to Con rm
Low
Low
override
High
High
override
Program
Program
MEnu
MEnu
Set Clock
Set Clock
Program
Program
MEnu
MEnu
Set on Time
Set on Time
Program
Program
MEnu
MEnu
Set off Time
Set off Time
Program
Program
override
LoW SPEED
LoW SPEED
o ErrIDE
o ErrIDE
Program
Program
override
HIGH SPEED
HIGH SPEED
o ErrIDE
o ErrIDE
EnTEr
EnTEr
EnTEr
EnTEr
EnTEr
EnTEr