Checking The Printer's Network Connection Status (Network Connection Report) - Epson WF-2110 Series User Manual

In These Situations
Note:
If you release the
is not printed on this report.
3. While holding down the
alternately.
4. Use your computer to enter the PIN code (an eight digit number) printed on [WPS-PIN Code] column of the
network status sheet into the wireless router within two minutes.
When a connection is established, the
Note:
❏ See the documentation provided with your wireless router for details on entering a PIN code.
❏ The printer is in a connection error status when the
clearing the printer error by pressing the
printer and try again. If it still does not work, print a network connection report and check the solution.
Checking the Printer's Network Connection Status (Network
Connection Report)
You can print a network connection report to check the status between the printer and the wireless router.
1. Load papers.
2. Press the button.
The network connection report is printed.
If an error has occurred, check the network connection report, and then follow the printed solutions.
Related Information
"Messages and Solutions on the Network Connection Report" on page 68
&
>
Re-Setting the Network Connection
button within 5 seconds, a network connection report is printed. Note that PIN code information
button, press the
button on the printer, reboot the wireless router, place it close to the
>
Checking the Printer's Network Connection Status (
button until the
light turns on.
light and the
67
light and the light flash
light flash simultaneously. After
...