Board; If-1073 Board - Sony PDW-HD1500 Maintenance Manual

6-12-7. HP-141 Board
Removal
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the control panel assembly.
(Refer to steps 2 to 6 of Section 1-4-2.)
3. Remove the KY-624 board.
(Refer to steps 3 to 6 of Section 6-12-6.)
4. Remove the screw, and remove the HP-141
board. (Remove HP-141 board with the
harness connected.)
5. Disconnect the harness from the connector
CN3 on the HP-141 board.
Reinstallation
1. Reinstall the removed parts by reversing
steps 1 to 4 above.

6-12-8. IF-1073 Board

Removal
1. Turn the PDW-HD1500 upside down.
2. Remove the five screws, and remove the
bottom plate assembly.
3. Disconnect the IF harness from the connector
CN2.
4. Remove the two screws, and remove the IF-

1073 board.

Reinstallation
1. Reinstall the removed parts by reversing
steps 1 to 4 above.
6-24
HP-141 board
CN3
x
PS2.6 5
x
PSW2.6 5
CN1
CN2
x
B3 6
Bottom
side
IF harness
HPR-23 board
CN1201
Bottom case block
x
B3 6
Bottom plate
assembly
IF-1073 board
PDW-HD1500/V1 (E)