Internal Video Test Signal - Sony PDW-HD1500 Maintenance Manual

9. When a package file that can be updated is found, the
screen changes to the following display. Press the
[SET] button.
M3E : USB MEMORY UTIL
M3E4 : PACKAGE UPDATE
CURRENT NEW
VERSION VERSION
1.00 --> 1.10
UPDATE OK?
CANCEL : F1 (RETURN)
EXECUTE : F5 (SET)
10. The update is executed, and the firmware name
currently updated and the elapsed time are displayed.
M3E : USB MEMORY UTIL
M3E4 : PACKAGE UPDATE
CURRENT NEW
VERSION VERSION
1.00 --> 1.10
UPDATING :
Total time : 00:00
n
Never disconnect the USB memory during the update.
11. The update is complete, and the message "COM-
PLETE" appears.
12. Turn the power OFF, and then turn it back ON.
13. Execute RESET ALL SETUP of the MAINTE-
NANCE MENU. (Refer to the Operation Manual.)
Updates the following softwares.
Name Board CPU
SY1 HPR-23 IC2601
SY2K NET-4 IC1
SY2U
DRV DR-601 IC600
PIER HPR-23 IC2103
PHOT HPR-23 IC801
VAX HPR-23 IC206
LVIS HPR-23 IC501
FAM HPR-23 IC1201
LUNA VPR-99 IC100
DSP0 HPR-23 IC1701, IC1702
DSP1 HPR-23 IC1801, IC1802
DSP2 HPR-23 IC1901
PRXA HPR-23 IC2001, IC2002
1-20
SY1
ROM
IC2905, IC2906
IC907, IC908
IC602
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
(HPR-23)
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
IC2905, IC2906
(Continued)
Name Board CPU
TSYS ENC-107 IC201, IC401, IC601
TMBP IC801, IC1001
HDRX RX-93 IC300
KY KY-624 U1
KYIC
MENU HPR-23 IC2601
FTBL
TS TSI-60 IC200
(Option) IC500
TSIC
(Option)

1-11. Internal Video Test Signal

This unit has the internal video test signal generator.
The test signals output from the video test signal generator
can be recorded.
Perform the following steps to output the test signals.
1. Display MAINTENANCE MENU.
(Refer to the Operation Manual.)
2. Select "M0: CHECK" with the [(]/[)] button, and
press the [*] button.
3. Select "C2: AUDIO/VIDEO" with the [(]/[)] button,
and press the [*] button.
4. "C21: VIDEO TSG" is selected. Press the [*] button.
5. Select the test signal to be output using the [(]/[)]
buttons, and press the [SET] button.
75% COLOR BARS:
BLACK:
Describes output waveform figures of this generator in the
next page.
ROM
IC2905, IC2906
(HPR-23)
IC103
U5
IC2905, IC2906
IC202
IC503, IC504
75% color-bar signal
black signal
PDW-HD1500/V1 (E)