If failed:
The following screen appears.
AUTO TEST
CHECKING...ERROR
EXIT: MENU KEY
4-22
4-7-10. FOCUS ACTUATOR
This menu allows you to check the focus of the 2-axis
actuator.
n
If a cartridge is inserted, eject it.
Menu hierarchy:
[M6 : DRIVE]
→ [D0 : DRIVE MAINTENANCE]
→ [CHECK]
→ [OPTICAL BLOCK]
→ [FOCUS ACTUATOR]
1. A confirmation screen appears waiting for entry of the
[SET] button.
FOCUS ACTUATOR
CHECK START?
OK:
SET KEY
EXIT: MENU KEY
2. Press the [SET] button.
The result appears.
Check that the 2-axis actuator moves several times.
If the actuator does not move or its movement is not
smooth, the harness may be connected improperly or
the optical block may be defective.
FOCUS ACTUATOR
CHECKING...OK
EXIT: MENU KEY
If failed:
The following screen appears.
FOCUS ACTUATOR
CHECKING...ERROR
EXIT: MENU KEY
PDW-HD1500/V1 (E)