6-12-6. KY-624 Board
Removal
1. Remove the top panel assembly.
(Refer to Section 1-4-1.)
2. Remove the control panel assembly.
(Refer to steps 2 to 6 of Section 1-4-2.)
3. Remove the Jog dial and the Shuttle ring.
4. Remove the four screws, and remove the
control sub panel block.
5. Disconnect the harnesses from the connectors
CN2, CN3.
6. Remove the KY-624 board from the bottom
case block.
Reinstallation
1. Reinstall the removed parts by reversing
steps 1 to 6 above.
n
For the method of routing the HP harness
(connected to CN3) and the speaker harness
(connected to CN2), refer to Fig. 1.
PDW-HD1500/V1 (E)
Control sub panel assembly
Shuttle ring
Jog dial
Speaker harness
KY-624
CN2
board
CN3
HP harness
HP-141 board
Fig.1
CN2
x
PSW2.6
8
Bottom case block
CN3
KY-624 board
Speaker harness
Bottom case block
HP harness
KY-624 board
6-23