Snmp - Sony PDW-HD1500 Maintenance Manual

3-4-2. SNMP

You can perform settings related to SNMP Agent of the SNMP function on the SNMP page of the Maintenance menu.
Item
Community Read-Only
Name Community
Read-Write
Community
Trap Community
Communication —
Hosts
IP Address
1/2/3
Trap Hosts —
Hosts
IP Address
1/2/3
Authentication
Trap
Status
*1: Single-byte alphanumeric characters only. Up to 16 characters can be entered.
PDW-HD1500/V1 (E)
Setting Function
public Sets the reading community name
Used when reading the MIB stored in XDCAM.
— Sets the reading-writing community name
Used when reading or writing the MIB stored in XDCAM
This needs to be set when writing the variables
(sysContact,sysName,sysLocation) of MIB-2 of XDCAM from the SNMP manager
public Sets the community name of the trap issued from XDCAM
— Sets the SNMP Manager with which to communicate using SNMP
none : Rejects communication from all SNMP managers
Set this when not using SNMP
any : Accepts communication from all SNMP managers
specific : Accepts communication only from the SNMP manager with the specified
IP address
— Specifies the IP address of the SNMP manager with which to communicate when
"specific" is selected. Up to three IP addresses can be specified
— Specifies the destination of the trap sent from XDCAM
none : Does not send the trap
specific : Specifies the SNMP manager to which to send the trap
n
When using SONY-PRO-MIB, select "specific" and specify the IP address of
the SNMP manager
— Specifies the IP address of the SNMP manager to which to send the trap when
"specific" is selected. Up to three IP addresses can be selected
on Sets whether or not to issue an authentication trap when there is an access from
a wrong community
on : Issues an authentication error trap
off : Does not issues an authentication error trap
Normally, set this to "on"
Display only OK, OK : Reboot the machine :
Displayed when the data is saved correctly
n
When "NG" is displayed, check the entered characters
*1
*1
*1
3-9