Sony PDW-HD1500 Maintenance Manual page 73

4. Press the F2 (SELECT) button or MULTI CONTROL
knob once to decide the function to be set to the F
button.
The function name in area 2 is changed from the
"selected" state to the "deselected" state. At the same
time, the function name in area 1 (F button to be set to)
is changed to what is selected in area 2.
M38:F-KEY CONFIG
M380:HOME2
1 NONE 2 NONE
3 NONE 4 NONE
*
5 SYNC 6 NONE
------------------------
SYNC
FINE
SPEAKER
PB/EE
OUT REF
To set a function to other F buttons, repeat steps 1 to 4.
5. To exit the menu, press the F1 (RETURN) button
once.
After setting, save the setting by M38F : NV-RAM
CONTROL.
PDW-HD1500/V1 (E)
M381 : PAGE8 ASSIGN
M38:F-KEY CONFIG
M381:PAGE8 ASSIGN
*
1 NONE 2 NONE
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
NONE
001:P-ROLL TIME -
002:CHARA H-POS -
003:CHARA V-POS -
004:SYNCHRONIZE -
This menu is used to assign the desired items of the basic/
extended setup menu to F1 through F6 buttons of the
PAGE8.
n
The following setup menu items cannot be assigned to
PAGE8.
Setup menu
Basic setup menu
Extended setup menu
As for the details of the setup menu, refer to the Operation
Manual.
Description of superimposed display
1 Area 1
The function names that are set to F1 through F6
buttons in setup menu PAGE8 are displayed. When no
setup menu is set, NONE is displayed.
(The factory setting is all NONE.)
2 Area 2
The setup menu names that can be set to F1 through
F6 buttons of the function menu PAGE8 are displayed
in scroll.
1
2
Not assignable Item No.
013, B01 to B20, and H00 to
H17, 029, 035
215
4-9