Sony PDW-HD1500 Maintenance Manual page 14

5. Move the control panel assembly slightly in the arrow
direction, and disengage the two claws of the hinge
assemblies from the groove of the bottom case.
Claw of the hinge assembly
Hinge assembly
6. Remove the lead wire with connector from the connec-
tor CN1, and remove the control panel assembly.
n
Be careful not to damage the lead wire with connector.
CN1
Control panel assembly
1-6
Groove of the bottom
case
Control panel assembly
Metal bracket of CP shield (A)
Lead wire with connector
7. Remove the two screws, and remove the CP shield (A)
assembly.
8. Disengage the two claws, and remove the front panel
assembly.
Claws
Front panel
assembly
CP shield (A)
assembly
PSW2.6 x 6
9. Reinstall the front panel assembly by reversing the
steps of removal.
Lead wire with connector
Hinge assembly
PDW-HD1500/V1 (E)