4-5. SERVICE SUPPORT (M2)
Displays or deletes the error log.
4-5-1. ERROR LOG (M20)
This menu displays registered error logs.
(Refer to "Section 2 Error Messages" for details.)
Menu hierarchy:
[M2 : SERVICE SUPPORT]
→ [M20 : ERROR LOG]
1. Select an error log using the [(]/[)] buttons, and press
the [*] button.
ERROR LOGGER
(001/005)
001 ERROR-92-103
002 ERROR-92-103
003 ERROR-92-103
004 ERROR-92-103
005 ERROR-92-103
2. Then the error log details appear.
m
. Turning the PUSH SET knob clockwise displays the
latest error log details.
. Turning the PUSH SET knob counterclockwise
displays the old error log details.
ERROR LOG
(001/005)
ERROR: 92-103
DATA:2008/04/02 11:49:40
TC :00:00:00:00
2008/04/02 18:47:19
SHIFT:MULTI CONTROL KNOB
PDW-HD1500/V1 (E)
4-5-2. DIAG CONTROL (M21)
This menu allows you to delete registered error logs.
n
Generally, do not delete the error logs.
The error logs contain important information helpful for
resolving or avoiding problems.
Menu hierarchy:
[M2 : SERVICE SUPPORT]
→ [M21 : DIAG CONTROL]
1. Press the [*] button.
MAINTENANCE MENU
M2:SERVICE SUPPORT
M21:DIAG CONTROL
CLEAR ERROR LOG
2. A confirmation screen appears.
Press the [SET] button.
The error log is deleted and the screen shown in step 1
appears.
ERROR LOG
ALL CLEAR OK ?
OK:MULTI CONTROL KNOB
ABORT:RESET KEY
4-5-3. OPTION STATUS (M22)
Check presence of option board installation.
Menu hierarchy:
[M2 : SERVICE SUPPORT]
→ [M22 : OPTION STATUS]
OPTION STATUS
SD REC&PB
: ena
MPEG TS Board
: ---
TO MENU : MENU KEY
4-7