Sony PDW-HD1500 Maintenance Manual page 75

M382 : PAGE8 NAME
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 005:
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[ ]
DISPLAY SEL
This menu is used to set the desired name to the setup
menu item assigned to PAGE8.
Description of superimposed display
1 Area 1
The setup menu item names that are set to F1 through
F6 buttons in the function menu PAGE8 or the item
numbers are displayed. When no setup menu item is
set, NONE is displayed.
(The factory setting is all NONE.)
2 Area 2
The setup menu item names that can be set to F1
through F6 buttons in function menu PAGE8 are
displayed in scroll.
To execute the renaming
1. Turn the MULTI CONTROL knob to move the *
mark in area 1 to the F button number to be set.
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 005:
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[ ]
DISPLAY SEL
2. Press the F2 (SELECT) button or MULTI CONTROL
knob once to decide the F button to be set to.
The cursor is appeared in area 2. For your reference,
the original name of the setup menu item is displayed.
Use the original name for your reference to abbrevia-
tion.
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 005:
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[ ]
DISPLAY SEL
PDW-HD1500/V1 (E)
1
2
3. Press the [(]/[)] buttons or turn the MULTI CON-
TROL knob to change the character.
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 005:
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[D ]
DISPLAY SEL
4. To move the cursor, press the [&]/[*] buttons or F3
(PREV), F4 (NEXT) button.
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 005:
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[DISP SEL]
DISPLAY SEL
5. Repeat the steps 3 and 4 for each character.
. When the RESET button is pressed, a single charac-
ter at the cursor position can be cleared. The cursor
position moves to the right after clearing.
. When the MULTI CONTROL knob is pressed while
pressing the SHIFT button, the setup item name (8
characters at the top) can be copied to the character
setup area.
6. Press the F2 (SELECT) button.
The new name of the F button is displayed in area 1.
M38:F-KEY CONFIG
M382:PAGE8 NAME
*
1 NONE 2 DISP SEL
3 NONE 4 NONE
5 NONE 6 NONE
------------------------
[DISP SEL]
DISPLAY SEL
To rename other menu item, repeat steps 1 to 6.
7. To exit the menu, press the F2 (SELECT) button once.
After setting, save the setting by M38F : NV-RAM
CONTROL.
4-11