Preparation In 59.94 Hz Mode - Sony PDW-HD1500 Maintenance Manual

8-4-2. Preparation in 59.94 Hz Mode

1. Turn the power off.
2. If the VPR-99 board is extended with an extension board, reattach the VPR-99 board without the extension board.
3. Turn the power on.
4. Set the VTR's switches and function menus as follows:
n
Reset the setups to the customer settings after completing the video system adjustment.
Location Item
Function menu page P1 : VIDEO
HOME
5. Set the ITEM-713 in the setup extended menu as follows:
n
After completing the video system adjustment in the 59.94 Hz mode, be sure to reset them to the customer settings.
ITEM
713 : VIDEO SETUP REFERENCE
6. Check that the setup extended menu is set as follows: (Refer to the operation manual.)
ITEM-013 (SYSTEM FREQUENCY SELECT) MENU 8 59.94 Hz mode
ITEM-930 (DOWN CONVERTER MODE)
7. Set the analog composite monitor to NTSC mode.
PDW-HD1500/V1 (E)
Customer setting
VID. PROC ____________
VIDEO ____________
CHROMA ____________
HUF ____________
SETUP ____________
CHAR SEL ____________
SUB-ITEM Customer setting
OUTPUT LEVEL ____________
8 SQUEEZE
Setting at adjustment
8
LOCAL
8
PRESET
8
PRESET
8
PRESET
8
PRESET
8
ON
Setting at adjustment
8
0.0%
Remarks
8-5