4. Press the F2 (SELECT) button or MULTI CONTROL
knob once to decide the menu item to be set to the F
button.
The “selected” state (by line-cursor indication) of the
menu item in area 2 is changed to the “deselected”
state. At the same time, the item number of the menu
item selected in area 2 is displayed in the menu item of
area 1 (the F button to be set to).
When a menu item containing a sub item is selected,
the sub item is displayed in area 2. In the same man-
ner, when the line cursor is moved to the sub item that
you want to assign, and when the F2 (SELECT) button
is pressed, the selected state is changed to the “dese-
lected” state, and the selected “Setup menu item No.:
_sub item No.” is displayed in area 1.
M38:F-KEY CONFIG
M381:PAGE8 ASSIGN
*
1 NONE
2 005:
3 NONE
4 NONE
5 NONE
6 NONE
------------------------
005:DISPLAY SEL -
006:LOCAL ENA
-
007:DISC TIMER
-
009:CHARA TYPE
-
011:CHARA VSIZE -
To set a function to other F buttons, repeat steps 1 to 4.
5. To exit the menu, press the F1 (RETURN) button
once.
After setting, save the setting by M38F : NV-RAM
CONTROL.
4-10