Arctic Cat 2014 450 Service Manual page 62

2. Remove the cap screws securing the V-belt cover to
the clutch cover; then slide the brake pedal outward
and remove the V-belt cover. Account for two align-
ment pins and a gasket.
3. Mark the movable drive face and the fixed drive face
for installing purposes; then remove the nut holding
the movable drive face onto the crankshaft.
4. Remove the movable drive face and spacer. Account
for the movable drive face rollers and outer drive
face cover.
KC149A
KC142A
5. Using a 6 mm cap screw threaded into the fixed
driven face, spread the driven pulley by turning the
cap screw clockwise; then remove the V-belt.
MD1033
6. Remove the fixed drive face.
MD1035
MD1034
MD1036
KC132
59