DSL-300’s Ethernet port, and the other end into the Ethernet port on the NIC installed in your PC. If the cable connection is good, a green LED on the front of the DSL-300 labeled Ethernet/Link will glow steadily.
Now connect the phoneline cable from the DSL-300 to your phone jack. If the ADSL Link LED does not glow green within one minute of its being connected, check all of your cable connections to make sure that they are correct and securely installed.
Installing the Software Drivers Step 1 - Turn on your PC and wait until Windows Operating System has been fully installed. Step 2 - Insert the DSL-300 Configuration Utility CD into the CD drive. Step 3 - Select START>RUN> Type in the letter for the CD-ROM drive. If the CD-ROM drive is “D”, then type “D:\Setup.exe”...
Installing the Software Drivers Installing the Software Drivers continued Click Next Click Next Click Next...
Installing the Software Drivers Installing the Software Drivers continued After files have been loaded, select “Yes, Launch the program file.” Using the Configuration Utility Using the Configuration Utility Click Discover Double click on the MAC address of the DSL-300.
Click on the “General ADSL Information” tab and input the proper VPI settings provided by your DSL provider. The DSL-300 comes with a default VPI of “0” and a VCI of “35.” To change these settings, simply highlight the number you wish to change, and type in a new value in the box.
Using the Configuration Utility continued Click Yes Click Yes Note: Do not manually restart the modem. It will automatically restart by itself. When the DSL-300 has been fully restarted, then it will be ready for use. Digital Home Solutions Printed in Taiwan...