Table of Contents
Advertisement
PARTS LIST
Before you start
Ensure all power is turned off.
1)
Disconnect wire leads and tubing on the switch.
NOTE: It is important to label wires and hose connections to ensure the new switch is hooked up in
the same manner.
2)
Remove the two screws on the mounting bracket.
Remove 2 screws
3)
Slide switch out to the left side.
4)
Remove switch and replace.
5)
Reverse steps to complete installation.
38
PRESSURE SWITCH REPLACEMENT
Regency IP28 Gas Inbuilt Fireplace
Advertisement
Table of Contents
Need help?
Do you have a question about the IP28-PROPANE and is the answer not in the manual?