Table of Contents
Advertisement
MAINTENANCE
Before you start:
Ensure all power is turned off.
1) Turn the unit off and allow it to cool to room temperature,
2) Unplug or disconnect power source to stove.
3) Open the bottom louvre.
4) Remove 2 wing nuts + washers securing fan - locations shown below.
5) Unclip wires from base of unit and unplug fan.
6) Disconnect polarized plug.
7) Manoeuvre fan from base of unit and replace.
36
CONVECTION FAN REPLACEMENT
8) Reverse steps to reinstall.
NOTE: It is essential that the two washers are re-fitted to the fan mounting
bolts prior to fitting the wing nuts.
Regency IP28 Gas Inbuilt Fireplace
Advertisement
Table of Contents
Need help?
Do you have a question about the IP28-PROPANE and is the answer not in the manual?