Table of Contents
Advertisement
INSTALLATION
Before leaving this unit with the customer, the installer must ensure that the appliance is firing correctly. This includes:
1) Clocking the appliance to ensure the correct firing rate (rate noted on label) at 15 minutes.
2) If required, adjusting the primary air to ensure that the flame does not carbon. First allow the unit to burn for 15 min. to stabilize.
Any alteration to the product that causes sooting or carboning that results in damage to the exterior facia is not the responsibil-
WARNING: 240V DISCONNECT POWER TO UNIT PRIOR TO WORKING ON ELECTRICAL COMPONENTS.
Caution: Ensure that the wires do not
touch any hot surfaces and are away
from sharp edges.
30
FINAL CHECK
CAUTION
ity of the manufacturer.
WIRING
This unit is polarity sensitive and will
not operate if polarity is incorrect.
STANDARD WIRING
CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can
cause improper and dangerous operation.
Regency IP28 Gas Inbuilt Fireplace
Advertisement
Table of Contents
Need help?
Do you have a question about the IP28-PROPANE and is the answer not in the manual?