Regency classic i2400m Owners And Installation Manual

Wood fireplace insert

Hide thumbs Also See for classic i2400m:

Owners & installation manual (20 pages)

Table Of Contents

Table of Contents

Quick Links

Need help?

Do you have a question about the classic i2400m and is the answer not in the manual?

Questions and answers

Summary of Contents for Regency classic i2400m

Page 1 Classic ™ I2400M Wood Fireplace Insert Owners & Installation Manual www.regency-fire.com French Manual: http://ow.ly/Zvzjy Manuel en Français: http://ow.ly/Zvzjy MODELS: I2400M Installer: Please complete the details on the back cover and leave this manual with the homeowner. Homeowner: Please keep these instructions for future reference.
Page 2 The following statements are required by the Environmental Protection Agency: “This manual describes the installation and operation of the Regency I2400 wood heater. This heater meets the 2015 U.S. Environmental Protection Agency’s crib wood emission limits for wood heaters. Under specific test conditions this heater has been shown to deliver heat at rates ranging from 12,000 BTU/hr. to 36,800 BTU/hr.”...
Page 3: Table Of Contents
Glass Replacement .............17 Step-by-step Installation Of The Fan/blower ....12 Glass Removal ............17 Floor Protection ............13 Main Assembly & Options - I2400m ......18 Firebrick Assembly ............13 Faceplates - I2400m ............19 Draft Control ..............13 Brick Panels - I2400m..........20 Warranty ..............22 Regency I2400M...
Page 4: Safety Label For I2400M
SAFETY LABEL FOR I2400M This is a copy of the label that accompanies your Regency Insert. We have printed a copy of the contents here for your review. NOTE: Regency units are constantly being improved. Check the label on the unit and if there is a difference, the label on the unit is the correct one.
Page 5 Regency I2400M...
Page 6: Before Installing Your Insert
Install Regency Inserts are designed to use either a and use only in accordance with manufactur- 5.5" (140mm) or 6" (152mm) flue. er’s installation and operating instructions.
Page 7: Optional Flue Connector Kit
(2 per side) as shown in the diagrams. View from Rear of Insert Note: The grill has a front and rear, the holes on the front side have rounded edges and the rear holes have flat edges. Regency I2400M...
Page 8: Masonry And Factory Built Fireplace Clearances
Compare proposed system R of 1.231 to R = 1/k x T = 1/0.84 x .75 = 0.893. specified R of 0.893. Since proposed system Thermal Resistance: R is greater than required, the system is acceptable. )(hr)( )(K) Regency I2400M...
Page 9: Installation Into Amasonry Fireplace
The amount of Solid-fuel Inserts in Factory-built Fire- draft in your chimney depends on the length of the Regency highly recommends the use of a full places" section for the requirements chimney, local geography, nearby obstructions...
Page 10: Stainless Steel Smoke Deflector Installation
WARNING: Operation of the unit with out proper installation of smoke deflector will void warranty. Ensure defector is seated so bolts are situated at the top of the keyhole before tightening. 10 | Regency I2400M...
Page 11: Step-By-Step Installation
The faceplate trim may be installed to the edge of the faceplate at this time. Faceplate Assembly Regency I2400M...
Page 12: Step-By-Step Installation Of The Fan/Blower
1) Align the fan support with the offset clip operation. on the bottom of the ashlip. 4) Push the Regency logo plate into the two holes in the front bottom left corner of the 2) Slide the supports into the clips. The tension fan.
Page 13: Floor Protection
Use a pair of vise grips or pliers and tap it into place with a hammer. A tighter fit will Handle at 10 o'clock position. Regency I2400M...
Page 14: Seasoned Wood
Two dry pieces banged together sound hollow; wet pieces sound solid and dull. • Dry wood weighs much less than wet wood. • Split a piece of wood. If the exposed surface feels damp, the wood is too wet to burn. 14 | Regency I2400M...
Page 15: Operating Instructions
This may result be used. 7) Your Regency Insert can be very hot. You in damage to your paint finish. may be seriously burned if you touch the insert while it is operating. Warn children FIRST FIRE of the burn hazard.
Page 16: Wood Storage
(3mm / 1/8" or more) it should be removed to reduce the risk of a chimney fire. 16 | Regency I2400M...
Page 17: Maintenance Of Nickel-Plated Doors
Do not substitute materials. If your glass door does break, do not continue to use your Your Regency Insert is supplied with 5 mm. DOOR GASKET unit until it has been replaced.
Page 18: Main Assembly & Options - I2400M
OFF Switch 47) 846-102 Screen Door 846-973 Door Handle Assembly 30) * Grommet Strain Relief 948-223 Regency Logo - Nickel 36) 033-953 Air Tube 3/4" (Qty:4) (each) 48) 820-482 Smoke Deflector 16) 846-570 Door Gasket Kit 37) 020-957 Baffle (2/set)
Page 19: Faceplates - I2400M
Black Trim Oversize (set of 3) 295) * Trim Right Oversize 296) * Trim Top Oversize 297) * Trim Left Oversize 298) * Faceplate Side Oversize 299) * Faceplate Top Oversize *Not available as a replacement part. OVERSIZE REGULAR Regency I2400M...
Page 20: Brick Panels - I2400M
Part # Description 180-960 Firebrick - Complete Set 70) 902-111 Brick Regular Full Size: 1-1/4" x 4-1/2" x 9" 75) * Brick Partial: 1-1/4 x 4-1/2" x 2" 76) * Brick Partial: 1-1/4" x 2" x 9" 20 | Regency I2400M...
Page 21 Regency I2400M...
Page 22: Warranty
At all times FPI reserves the right to inspect reported complaints on location in the field claimed to be defective prior to processing or authorizing of any claim. Failure to allow this upon request will void the warranty. Revision Date: December 2016 Regency Wood Products Warranty 22 | Regency I2400M...
Page 23 Freight damages for products or parts are not covered under the terms of the warranty. Products made or provided by other manufacturers and used in conjunction with the FPI appliance without prior authorization from FPI may void this warranty. Revision Date: December 2016 Regency Wood Products Warranty Regency I2400M...
Page 24 Product Registration and Customer Support: Thank you for choosing a Regency Fireplace. Regency strives to be a world leader in the design, manufacture, and marketing of hearth products. To provide the best support for your product, we request that you complete a product registration form at http://www.regency-fire.com/Customer-Care/Warranty-Registration.aspx...
Page 25 Product Registration and Customer Support: Thank you for choosing a Regency Fireplace. Regency strives to be a world leader in the design, manufacture, and marketing of hearth products. To provide the best support for your product, we request that you complete a product registration form found on our Web Site under Customer Care within ninety (90) days of purchase.
Page 28 Dealer Name & Address: ______________________________________________ ___________________________________________________________________ Installer: ___________________________________________________________ Phone #: ___________________________________________________________ Date Installed: ______________________________________________________ Serial No.: __________________________________________________________ Regency and Classic are trademarks of FPI Fireplace Products International Ltd. © Copyright 2016, FPI Fireplace Products International Ltd. All rights reserved. Printed in Canada...

Regency classic i2400m Owners And Installation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Regency classic i2400m

Summary of Contents for Regency classic i2400m

Table of Contents