Suzuki GSX1300BKA Supplementary Service Manual page 84

4E-49 ABS:
Step
3 1) Disconnect the rear wheel speed sensor coupler.
2) Measure the resistance between "A" (W) and ground at
the rear wheel speed sensor coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
Tester knob indication
Resistance (Ω)
Normal value ("A" – Ground)
∞ Ω (Infinity)
(A)
Is the resistance between "A" and ground OK?
4 1) Measure the resistance between "19" (B/Y) and ground
at the ABS control unit coupler.
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Resistance (Ω)
Normal value ("19" – Ground)
∞ Ω (Infinity)
ABS control unit coupler (Harness end)
Is the resistance between "19" and ground OK?
Action
Sensor side
"A"
I823H3450049-02
(A)
(B)
I823H3450050-03
Yes
Inspect the wire
harness. (Faulty W/Y
wire)
Go to Step 6.
No
Replace the rear wheel
speed sensor. Refer to
"Rear Wheel Speed
Sensor Removal and
Installation
(GSX1300BKAK8)
(Page 4E-10)".
Go to Step 5.