Suzuki GSX1300BKA Supplementary Service Manual page 62

4E-27 ABS:
Use of SDS
NOTE
• The previous malfunction history code
(Past DTC) still remains stored in the ABS
HU. Therefore, erase the history code
memorized in the ABS HU using SDS tool.
• The DTC is memorized in the ABS HU also
when the wire coupler of any sensor is
disconnected. Therefore, when a wire
coupler has been disconnected at the time
of diagnosis, erase the stored malfunction
history code using SDS.
1) Remove the right frame cover. Refer to "Exterior
Parts Removal and Installation in Section 9D in
related manual".
2) After repairing the trouble, turn OFF the ignition
switch and turn ON again.
3) Set up the SDS tool. (Refer to the SDS operation
manual for further details.)
Special tool
: 09904–41010 (SDS set)
: 99565–01010–015 (CD-ROM Ver.15)
4) Click the ABS button (1).
5) Click the "DTC inspection" button (2).
1
I718H1450054-01
2
I718H1450055-01