Suzuki GSX1300BKA Supplementary Service Manual page 25

Rear Wheel Assembly Removal and Installation
(GSX1300BKAK8)
Removal
1) Remove the rear wheel speed sensor (1).
2) Remove the rear wheel assembly (2). Refer to "Rear
Wheel Assembly Removal and Installation in related
manual".
Tightening Torque Specifications
NOTE
The specified tightening torque is also described in the following.
"Front Wheel Components (GSX1300BKAK8) (Page 2D-1)"
"Front Wheel Assembly Construction (GSX1300BKAK8) (Page 2D-2)"
"Rear Wheel Components (GSX1300BKAK8) (Page 2D-4)"
"Rear Wheel Assembly Construction (GSX1300BKAK8) (Page 2D-5)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C in
related manual".
B823H32406020
1
I823H3240005-01
2
I823H3240006-01
Specifications
Installation
1) Install the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation in related
manual".
2) Check the clearance between the rear wheel speed
sensor and sensor rotor using the thickness gauge.
Special tool
(A): 09900–20803 (Thickness gauge)
(B): 09900–20806 (Thickness gauge)
Wheel speed sensor – Sensor rotor clearance
0.3 – 1.5 mm (0.012 – 0.059 in)
(A),(B)
Wheels and Tires: 2D-6
I823H3240007-01
B823H32407002