Leds For Lan Connectors - NEC Express5800/R120d-2E User Manual

Chapter 1 General Description
4.7.8

LEDs for LAN connectors

The five LAN connectors provided at the rear of the server have two LEDs each.
LAN connectors for
data transmission
•
LINK/ACT LED (
This LED indicates the state of the LAN port.
LINK/ACT LED pattern
On (green)
Flashing (green)
Off
•
SPEED LED (
This LED indicates which network interface is used.
The four LAN connectors for data transmission support 1000BASE-T, 100BASE-TX, and 10BASE-T.
Management LAN port supports 100BASE-TX and 10BASE-T.
On (amber)
On (green)
Off
LINK/ACT LEDs
4 3
1, 2, 3, 4,
1, 2, 3, 4, M)
SPEED LED pattern
Express5800/R120d-2E User's Guide
LINK/ACT LED
2 1
SPEED LEDs
M)
Explanation
The server and hub are powered and properly connected
The network port is transmitting or receiving data.
Check the cable or connection
Explanation
Operating with 1000BASE-T
Operating with 100BASE-TX
Operating with 10BASE-T
4. Names and Functions of Parts
SPEED LED
Management
LAN connector
M
47