Chapter 2 Preparations
< Express5800/R120d-2E(3.5-inch Drive Model)>
SAS_B
SAS_A
SAS_B
Upside
Downside
5.
Install the two fan units to the fan cage.
6.
After tearing off the seal, put the Anti-vibration rubber sheet on the fan units installed above.
SAS_A
Connect to MB(Additional HDD Cage (Rear) Power connector)
HDD cage (rear)
Express5800/R120d-2E User's Guide
HDD Backplane Board
SAS/SATA cable
SGPIO cable
Power cable
Cable
Let the rubber sheet run off the
edge approximately 2mm.
1. Installing Internal Optional Devices
95