NEC Express5800/R120d-2E User Manual page 80

Chapter 2 Preparations
Slot number
PCI Standard
PCI slot
performance *1
Socket type *2
Transfer
bandwidth (per
Product
lane) *1
number
Slot size
Available card
Product name
N8104-132 1000BASE-T Adapter
(2ch)
[PCI Express 2.0(x1)]
N8104-133 1000BASE-T Adapter
(4ch)
[PCI Express 2.0(x1)]
N8104-128 10GBASE Adapter
(SFP+/2ch)
[PCI Express 2.0(x8)]
N8104-131 10G Converged
Network Adapter (2ch)
(10Gbps/Optical)
[PCI Express 2.0(x8)]
N8117-01A Additional RS-232C
connector kit *3
Installed as standard
*1 Data transfer rate of PCI slot = Transfer bandwidth × Number of lanes
<Example> x8 lane = 64 Gbps (one-way)
*2 Connector size. Cards exceeding the number of sockets cannot be connected.
<Example> x4 socket can connect with x1 and x4 cards, but not x8 card.
*3 Use RS-232C cable (B).
* For details of functions of each card, refer to the technical guide.
* The card performance described in the parentheses after the Product name indicates the maximum operation
performance of the card.
* When the operation performance of a PCI card is higher than the PCI slot on the server, the PCI card operates
with the performance of the PCI slot on the server.
80
#1A #1B
PCIe 3.0
X8 lane X4 lane
X8 socket
Dedicated Low profile (bracket
to RAID shape is for full-height
Controller
Dedicated
to RAID 197mm max.
size
Controller
−
−
−
−
−
− Cannot be installed
Can be installed
Express5800/R120d-2E User's Guide
#2B #3B #1C
X8 lane X1 lane
X4 socket X8 socket
8Gb/s
Full height
card)
177mm max.
−
−
−
1. Installing Internal Optional Devices
#2C
PCIe 2.0
X4 lane
5Gb/s
Remarks
Low profile
For additional LAN
port.
Teaming
(AFT/SFT/ALB) and
bonding with onboard
LAN (including
additional riser card)
and
N8104-138/132/133 is
supported.
For additional LAN
port.
Teaming
(AFT/SFT/ALB) and
bonding with onboard
LAN and
N8104-138/132/133 is
supported.
For additional LAN
port.
Prepare SFP+ module
N8104-129 if needed.
Teaming
(AFT/SFT/ALB) and
bonding with
N8104-128 is
supported.
For additional
DCB/FcoE.
SFP module is
factory-installed.
Teaming/bonding with
LAN is not available.
For additional serial
port B (RS-232C)
Supports up to one
adapter
(#1C recommended)