NEC Express5800/R120d-2E User Manual page 151
Nec express server express5800 series
Hide thumbs
Also See for Express5800/R120d-2E:
- Configuration manual (39 pages) ,
- Hardware specification (2 pages) ,
- User manual (151 pages)
Table of Contents
Advertisement
Chapter 3 Setup
4.
When the Off-line TOOL MENU appears, select BMC Configuration, BMC Configuration, Network,
and then Property.
5.
If Property is selected, the following screen is displayed. On this screen, specify whether to use DHCP
and if DHCP is not used, configure IP Address/Subnet Mask.
6.
Connect the LAN cable to the management LAN connector in order to connect to the network. It will be
available for use if you access EXPRESSSCOPE Engine 3 via Web browser from PC for management
according to the setting.
Tips
If Shared BMC LAN is enabled, Web feature, remote media/KVM feature, or
command line interface feature may be interrupted. In this case, wait for a while,
and connect with network again.
Express5800/R120d-2E User's Guide
3. EXPRESSSCOPE ENGINE 3
151
Advertisement
Table of Contents
