Removal - NEC Express5800/R120d-2E User Manual

Chapter 2 Preparations

1.20.2 Removal

Remove a Hard Disk Drive, reverse the installation procedure.
If you transfer or dispose of the removed hard disk drive, refer to Chapter 1 (1. Transfer, Movement, and
Disposal) in "Maintenance Guide" to erase data.
Run SETUP utility, and then specify the boot order from the Boot menu. For details about the Boot menu,
refer to Chapter 2 (1. System BIOS) in "Maintenance Guide".
116
Important
NEC assumes no liability for data leakage should the product be transferred
to a third party without erasing the data.
Note
If you have to remove a disk due to a hard disk drive failure, check the slot with its
DISK LED lit in amber.
Note
Do not pull the handle to remove the hard disk drive.
Doing so may damage the handle.
Tips
The saved boot order is cleared when a hard disk drive is removed.
Express5800/R120d-2E User's Guide
1. Installing Internal Optional Devices
DISK LED