Ring Delay; Setting Ring Delay; Picking Up Calls During Ring Delay; Conducting Calls With More Than One Subscriber - Siemens 4075 Operating Instructions Manual

Table of Contents

Advertisement

Ring delay

Step
by
Using the ring delay feature you can configure a handset for each individual
Step
incoming MSN to delay response to the call signal. However, during this ring
delay time the handset can accept the call using the "
without a call signal queuing. When this feature is being configured, the time
allowed by the answering machine for recording a message (default:
Automatisch 2/4) must be taken into account. When the ring delay that has
been set is higher than the setting on the active answering machine, there is
no call signal as the answering machine accepts the call beforehand.

Setting ring delay

Press
1.
Select using [
2.
o
user
Select using [
3.
Select using [
4.
5.
Select using [
Set
No. of Rings
6.

Picking up calls during ring delay

A call is coming through to the assigned MSN.
1.
Press the # key, the following appears in the display:
2.
Press the softkey
3.
or
Press the softkey
3.

Conducting calls with more than one subscriber

Internal enquiry call

You would like to call an internal subscriber during an external call.
Press [INT] or
1.
A connection is established with the internal subscriber.
or
Press the softkeys: [INT] or
1.
Select using [
2.
A connection is established with the internal subscriber.
If the internal subscriber dialled is busy:
Press [BACK]: You are reconnected with the external caller.
3.
The internal subscriber answers the call:
or
Toggling: you can switch between call parties with [
3.
or
3.
Three-way calling: press [CONF .]. This establishes the conference circuit.
or *for selection menus.


] and [OK]:
Service Set up or Base set up
Set up device
.
9
]: (required internal subscriber) .

] and [

] and [OK]:
Ring delay
9
]: (required MSN) .

] and [
using [

YES
. You can then answer the call.
NO
. You can set up your own external or internal call.
)
and enter the call number for the second subscriber.

] and [OK]: (required internal subscriber) .
.
-

],

= off.
)
o [LIST].
Accept?
" function
o
o
Settings
Set up
Accept?
Ž
] and [

].
31

Advertisement

Table of Contents
loading

Table of Contents