Table of Contents
Advertisement
Emergency Nos.
Step
by
Two or three emergency numbers (country-specific) are entered at the base
Step
station. Five additional emergency numbers can be added to the following
positions. The first position in the list is assigned the Siemens Hotline for your
Gigaset 4070/4075isdn as standard. This preset can be overwritten.
Configuring new emergency numbers
Press
1.
Select using [
2.
Security
3.
Enter the system PIN and confirm with [OK].
Select using [
4.
5.
Confirm [
Select using [
6.
You can also delete or display an emergency number in this supplementary
menu.
Enter the new emergency number (max. 32 digits) and confirm [
7.
Select using [
8.
You can also add a number from the directory to this supplementary menu as
an emergency number, or use a provider number (if supported).
If your Gigaset 4075isdn is connected to a PABX, you may have to enter the
Info
relevant prefix (e.g. 0) for external calls before dialling the emergency number.
This also applies to the permanent stored numbers 110 and 112, for which you
may, for example, have to enter the numbers 0110 and 0112 as replacements.
Dialling an emergency number with active DSS and/or active telephone
lock
The [EMERG.] softkey is displayed when DSS/telephone lock is active, see the
operating instructions for your Gigaset 3000/2000 Comfort.
Press any key or
1.
2.
Confirm EMERG.
Enter the emergency number.
3.
56
or *for selection menus.
] and [OK]:
Service Set up
.
] and [OK]:
Emergency Nos.
9
].
] and [OK]:
Change number
Save entry
] and [OK]:
D
.
o
or
Base Set up
o
<no entry>
.
.
.
o
Settings
9
].
Advertisement
Table of Contents
