Internal Collective Call; Calling Another Party During An External Call; External Enquiry; Ending The Call - Siemens 4075 Operating Instructions Manual

Step RU«
by
Step

Internal collective call

If there are several internal subscribers registered at the base station, you can
call all of them simultaneously by means of a collective call. This is possible
only if automatic line seizure is deactivated ((see page 62) ).

Calling another party during an external call

You can call an
You can call an

External enquiry

Ending the call

64
Press this key. This places the first caller on hold.
2
Speak to the second caller.
=
Pressing the R key allows you to toggle between the two
callers.
Lift the handset.
>
All registered terminals of type "Telephone" or "Neutral" are

called.
You are connected to the first subscriber that answers the
=
collective call.
external party during an
internal party during an
You are engaged in an external call.
=
Press this key. The external caller is put on hold.
2
Press this key.

Enter the desired external number.
J
You are connected to the dialled subscriber. If you wish, you
=
can use the R key to toggle between the two parties.
Hang up to end the current call. You are then recalled to the
;
first call.
external call.
external call.