Table of Contents
Advertisement
Setting the device type
Step
by
[Telephone] is preset for the analog connections Internal 21 and Internal 22 and
Step
the GAP devices. You can make and receive calls once a telephone is
connected. If you connect an additional corded device (e.g. fax), the device
type must be modified again accordingly. The entry
additional input for this device in the case of MSN and answering machine
configurations.
Confirm the prompt for setting the device type for subscribers with [JA].
1.
Confirm the prompt for assignment with [JA].
2.
Select using [
3.
The assignments for additional internal subscribers are offered.
Selecting the incoming MSN
This is the call number used to contact your terminal. You can select several
MSNs.
Confirm the prompt for incoming MSN references with [JA].
1.
Confirm the prompt for assignment with[JA] if the required internal call number
2.
is displayed, otherwise select [NO] to go to the next internal call number.
Select using [
3.
The selection is confirmed with Š.
Selecting the outgoing MSN
You are conducting an outgoing call via this call number. This call number is
transmitted to the called party. The provider calculates the call charges incurred
using this MSN. You can only select one outgoing MSN.
Confirm the prompt for outgoing MSN references with [JA].
1.
Confirm the prompt for assignment with[JA] if the required internal call number
2.
is displayed, otherwise select [NO] to go to the next internal call number.
Select using [
3.
Connecting to a PABX
If you require a PABX connection:
Answer the prompt for the PABX with [JA].
1.
Confirm the prompt for the prefix (exchange code) with [JA].
2.
Enter the exchange code and confirm with [
3.
Select using [
4.
The installation is terminated with the aid of the Installation Assistant.
22
] and [OK]: (required device) .
] and [OK]: (one or more MSN) .
] and [OK]: (one MSN) .
] and [OK]:
Eintrag sichern
"No
function" blocks any
].
9
.
Advertisement
Table of Contents
