Table of Contents
Advertisement
Setting external/internal enquiry calls
Step
by
You can set your telephone so that:
Step
O
when conducting an enquiry with an external subscriber arising from an
external call, the original caller is held in the central office so that your
second ISDN line remains free
O
when conducting an enquiry with an external subscriber arising from an
external call, the original caller is held in the base station which means that
both ISDN lines are busy (see also „Configuring music-on-hold" on page 27)
Int. Enq. Call
Info
If "
automatically placed on hold in the central office.
The default setting is "Ext. Enq. Call" .
Press
1.
Select using [
2.
settings
or
Select using [
2.
settings
Confirm with [OK].
3.
Rejecting calls for entire MSN group
You can reject an external call. The call is signalled acoustically and displayed
for all members of this MSN group. If "REJECT" is pressed the caller will hear
the busy tone instead of ringing tone. The call is no longer signalled for any
group member. A displayed call number is entered in the "Missed calls" .
Configuring "reject" for the entire MSN group
Press
1.
2.
Select using [
settings
Select using [
3.
The selection is confirmed with Š.
26
" is set and the second B channel is in use, calls are
or *for selection menus.
] and [OK]:
Service Set up or Base Set up
o
o (
Int. Enq. Call
] and [OK]:
Service Set up or Base Set up
o
o (
Ext. Enq. Call
or *for selection menus.
Service Set up or Base Set up
] and [OK]:
o
Reject All
.
] and [OK].
'
in front of menu item = ON / no = OFF).
'
in front of menu item = ON / no = OFF).
o
o
Settings
ISDN
o
o
Settings
ISDN
o
o
Settings
ISDN
Advertisement
Table of Contents
