Operation with the entrance
Step
by
Step
telephone
Configuring the entrance telephone
Press
1.
Select using [
2.
o
user
Select using [
3.
Select using [
4.
Assigning internal users to the entrance telephone call group
Press
1.
Select using [
2.
o
user
Select using [
3.
Select using [
4.
Forwarding the entrance telephone externally
All entrance telephone calls can be forwarded to an external call number.
Entering/modifying a destination call number for external call forwarding
Press
1.
Select using [
2.
o
user
3.
Select using [
Select using [
4.
Select using [
5.
If a destination call number has not yet been stored, the entry <blank> is
displayed.
Select using [
6.
Enter the new or modified destination call number and confirm with [
7.
Select using [
8.
Deleting a destination call number for external call forwarding
1.
Press
Select using [
2.
o
user
Select using [
3.
Select using [
4.
Select using [
5.
Select using [
6.
1. This configuration is only applicable for entrance telephones in accordance with FTZ
(door opener via ring current). Telephones with DTMF control must be programmed
like normal telephones.
or *for selection menus.
] and [OK]:
Service Set up
Set up device
.
9
]: (required internal subscriber 21 or 22) .
] and [
] and [OK]:
Device select.
or *for selection menus.
] and [OK]:
Service Set up
Set up device
.
] and [
]: (required internal subscriber) .
9
] and [OK]: Door call grp.
or *for selection menus.
Service Set up
] and [OK]:
Set up device
.
9
]: (configured entrance telephone Int 21 or Int 22) .
] and [
] and [OK]: Forw.entr.tel.
9
]: (destination call number) .
] and [OK]: Change number.
] and [OK]: Save entry.
or *for selection menus.
] and [OK]:
Service Set up
Set up device
.
9
]: (configured entrance telephone Int 21 or Int 22) .
] and [
] and [OK]: Forw.entr.tel.
9
]: (delete number) .
] and [OK]: Delete number.
o
or
Base Set up
Settings
1
o Door
.
o
or
Base Set up
Settings
o
Base Set up
Settings
or
o
or
Base Set up
Settings
o
Set up
o
Set up
o
Set up
9
].
o
Set up
67