Surface Mount 1803 And 1810 Units With Recess Box - DKS 1803 Owner's Manual

1.3

Surface Mount 1803 and 1810 Units with Recess Box

Surface mount units can be semi-flush mounted into a wall or pilaster by using the optional recess-
mounting box (p/n 1803-150). Be sure the unit is mounted securely and is not subject to vibration
from closing doors or gates.
WARNING! If this entry system is used to control a vehicular gate with an
automatic gate operator, the entry system must be mounted a minimum of
ten (10) feet away from the gate and gate operator, or in such a way that a
person cannot operate the entry system and touch the gate or gate operator
at the same time.
Standard Surface Mount Recess Mounting Box
1.625
2.687
1800-060-S-3-14
13.375
10.125
10-24 x 1.25 STUD (4 PL)
9.0
9.0
.25 DIA
1.375 DIA
6.0 3.687
6.0
.25 DIA
3.5 3.5 2.187
11.375
3.625
.437
.25 DIA
DOORKING, INC., INGLEWOOD, CA 90301
Title: Surface Mount Recess Mounting Box
Date: 10/05 Dwg. No. M1800-065-2 Rev.
B
Page 13