4) Specifications of clutch motor (non-trimming type: KM-857J)
MODEL
HEC-1701
HEC-1703
HEC-1705
HEC-1706
5) Peripheral automation devices (optional: trimming type)
Optional Device
Auto Knee Lifting System
Production Counter
Material Edge Sensor
Standing Pedal
VOLT
1 phase 220V
3 phase 220V/380V
3 phase 220V
1 phase 220V
Model
A solenoid operating structure where the presser foot gets lifted
SPF-3A
automatically with pedal reverse gear stage 1 operation.
A counting device which indicates the completed quantity on the
SCOUN-1
program unit panel, including added, subtracted, corrected or
remaining quantity along with other performance rates
A device that senses the edge or thickness of the sewing material
SEDG-1B
to stop the machine without manual pedaling. Available in two
types: SEDG-1B for edge sensing type and SEDG-2B for
SEDG-2B
thickness sensing type
A device needed when only one operator runs several sewing
SPDL-1
machines. Pedals for acceleration, thread trimming, presser foot
and ascending are built separately. There are two types: SPDL-1
SPDL-2
for fixed speed type and SPDL-2 for adjustable speed type.
WATT
250W
250W
400W
400W
Usage
HERTZ
50/60 Hz
50/60 Hz
50/60 Hz
50/60 Hz
9