Ahlborn ALMEMO 2590-2 Operating Instructions Manual page 12

4. Introduction
Measured value memory
On data logger 2590-3S or 2590-4S all measured values can be saved to an
EEPROM either manually or automatically per cycle. Standard memory capaci-
ty is 64 KB - sufficient for up to 12,000 measured values. The memory can be
organized and configured in linear or ring form. Output is via the interface. Se-
lection can be specified according to a time interval or number.
All devices in the ALMEMO
connector with a multimedia card, be upgraded to a high-capacity data logger.
With an external memory connector, available as an accessory, files can be
read out very quickly via any standard card reader.
Numbering of measuring operations
By entering a number single scans or entire series of measuring operations
can be identified and selectively read out from the memory.
Control ports
A relay trigger analog adapter can be used to provide up to 10 output relays,
and, as option, up to 4 analog outputs and 2 trigger inputs.
Operation
All measuring and function values can be displayed in different menus on the
dot matrix LCD screen. User menus can be individually configured from a
range of nearly 50 functions for your specific applications. You can use texts,
lines, and blank lines to arrange and format the layout in a style suited to your
application. Six keys (four of them softkeys) can be used to operate the device.
This system also allows you to fully program the sensors, the device and the
process control.
Output
All data logs, menu functions, saved measured values, and stored program pa-
rameters can be output to any peripheral equipment. RS232, RS422, USB, and
Ethernet interfaces are available using the appropriate interface cables. Mea-
sured data can be output in list, column, or table format. Files in table format
can be processed directly using any standard spreadsheet software. The print
header can be programmed to refer specifically to your company or to your ap-
plication.
Networking
®
All ALMEMO devices can be addressed and can be easily networked by sim-
ply linking them together via network cable or for longer distances via RS422
network distributors.
Software
®
Each ALMEMO
age, which can be used to configure the measuring instrument and user
menus, to program the sensors, and to read out from the measured value
memory. Using the integrated terminal, measuring operations can also be per-
formed online. The WINDOWS
the purposes of measured value acquisition via networked devices, for graphi-
cal presentation, and for more complex data processing.
12 ALMEMO
®
2590 series can, by fitting an external memory
Manual is accompanied by the AMR-Control software pack-
®
software package WIN-Control is provided for
® 2590