Error Messages - imagistics ipc1-im8130 Operator's Manual

Error Messages

Message
Scan kit Internal Error (SK1)
Scan kit Internal Error (SK2)
Select either Public or Private scan.
Private scan may require a
password.>
Internal memory used is NN%.
Select either Public or Private scan.
Private scan may require a
password. > Shared memory used
is NN%.
Scan Kit Internal Error (SK3)
Scan Kit Internal Error (SK4)
Scan Kit Internal Error (SK5)
Scan Kit Internal Error (SK6)
Invalid group password
Finish glass Scan (Max page
reached)
Finish glass Scan (A document is on
ADF)
60
Error Messages Defined
Restart the controller. If the controller is not restored,
contact the Network Administrator.
Restart the controller. If the controller is not restored,
contact the Network Administrator.
Determine the job in progress by reviewing the Scan
Jobs screen in Printer Utility. When a job is present,
either wait for it to complete, or delete it. If the job will not
complete, delete it. If the error persists, restart the
controller. If the error still persists after restarting the
controller, contact the Network Administrator.
Delete unnecessary data stored on the controller. Use
the ipc1 TWAIN Driver to delete data from the
GL_TWAIN folder, or an appropriate application to delete
data from the GL_SHARE folder.
Restart the controller. If the controller is not restored,
contact the Network Administrator.
Database access error. Restart the controller. If the
controller is not restored, contact the Network
Administrator.
Restart both the controller and the copier. If the controller
is not restored after restarting, contact the Network
Administrator.
Scanning cannot be started due to the copier status.
Make sure that the operation on the copier is correctly
set up and then retry scanning.
???Finish glass scan (a document is on the ADF). To
read the original from the ADF, try again after the glass
scan is complete.???
The number of pages has reached the maximum (100
pages or 200 images if duplex). Finish scanning.
A document on the glass is being scanned. Wait until the
current scan process is complete before using the ADF
scan function.
Action (End User)
ipc1-im8130 Scan Operator's Guide