Introduction; Placing The Originals - imagistics ipc1-im8130 Operator's Manual

Scanner operation

Hide thumbs Also See for ipc1-im8130:

Table of Contents

Introduction

To scan a document, you must place the originals either in the Automatic

Document Feeder (ADF) or on the glass. Then use either the Public Scan

feature or the Private Scan feature as appropriate.

This section outlines how to place documents for scanning.

Using the Automatic Document Feeder

Note: Remove any paper clips or staples from the originals before

placing them on the feed tray.

Align the edges of the originals. Set the originals face up on the feed tray,

then align the sliders to the edges of the originals.

Up to 100 sheets can be placed in the ADF at one time. Continuous

scanning is possible. The total number of images is dependent on the

scan resolution. Each batch (up to 100 sheets) cannot exceed the internal

space available on the digital copier, which is 300 MB for the im8130/

im6530 digital copier.

When the batch (up to 100 sheets) is complete, you can continue the scan

job. Place a second batch, again up to 100 sheets) in the ADF and press

ONTINUE

exceed 1 GB of data.

If any of the limits are exceeded (over 300 MB, or over 1 GB total), an error

is posted notifying you of a scan overflow and the remainder of the job is

cancelled.

Using the Automatic Document Feeder

. The total size of the scan job, including all batches, cannot

ipc1-im8130 Scan Operator's Guide

Table of Contents

Do you have a question about the ipc1-im8130 and is the answer not in the manual?