Concluding Steps; Replacing Pcie Sw Cards; Preliminary Steps; Removing A Pcie Sw Card - Fujitsu PRIMERGY RX4770 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
9.7.2.3

Concluding steps

"Reassembling" on page 53
Ê
"Connecting the server to the power source" on page 57
Ê
"Switching on the server" on page 58
Ê
"Enabling SVOM boot watchdog functionality" on page 74
Ê
"Resuming BitLocker functionality" on page 80
Ê
9.7.3

Replacing PCIe SW cards

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
9.7.3.1

Preliminary steps

"Suspending BitLocker functionality" on page 59
Ê
"Disabling SVOM boot watchdog functionality" on page 60
Ê
"Locating the defective server" on page 43
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting power cords" on page 46
Ê
Ê Remove all external cables from the PCIe SW card to be replaced.
"Getting access to the component" on page 48
Ê
Ê Locate the defective expansion card using the onboard Local Diagnostic
LEDs as described in section
page 321.
9.7.3.2

Removing a PCIe SW card

"Removing PCIe SW cards" on page 173
Ê
Ê If the slot bracket on the defective PCIe SW card is to be reused, remove it from
the board as described in section
174
"Onboard indicators and controls" on
"Removing the slot bracket" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 5 minutes
143.
RX4770 M1