Table of Contents
Advertisement
I
Fujitsu does not assume responsibility for any damage to the tape
drive, the data cartridge / tape or for the loss of any data resulting
from manual tape extraction procedures.
5.1.4
Verifying and configuring the backup software
solution
I
This task only applies to the Japanese market.
Depending on the backup software solution, it may be necessary to disable or
delete the backup drive from the backup software drive list before starting the
maintenance task.
This is the case for the following backup software solution:
– BackupExec
I
Procedures may differ depending on the backup software. For details,
refer to the dedicated documentation provided separately.
Further information on suitable backup software solutions and related
documentation is available to Fujitsu service partners from the Fujitsu
Extranet pages.
5.1.5
Note on server maintenance in a Multipath I/O
environment
When booting your server offline from the ServerView Suite DVD to perform an
offline BIOS / firmware update using the ServerView Update DVD or collect
diagnostic data using PrimeCollect in a Multipath I/O environment, there is a risk
of damaging the system configuration which may leave the system unable to
boot.
I
This is a known restriction of Windows PE with Multipath drivers.
Using Update Manager Express
Ê If performing an offline BIOS / firmware update, first of all prepare the
ServerView Update DVD or USB stick:
Ê Download the latest ServerView Update DVD image from Fujitsu:
RX4770 M1
Upgrade and Maintenance Manual
Basic software procedures
63
Advertisement
Table of Contents
