11.2
Installing processors
Upgrade and Repair Unit
(URU)
Tool:
Philips PH2 / (+) No. 2 screw driver
V
CAUTION!
Processors are extremely sensitive to electrostatic discharge and must
be handled with care. After a processor has been removed from its
protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.
11.2.1 Preliminary steps
"Suspending BitLocker functionality" on page 59
Ê
"Disabling SVOM boot watchdog functionality" on page 60
Ê
"Shutting down the server" on page 46
Ê
"Disconnecting power cords" on page 46
Ê
"Getting access to the component" on page 48
Ê
"Removing memory boards" on page 220
Ê
"Removing expansion cards" on page 145
Ê
RX4770 M1
Upgrade and Maintenance Manual
Hardware: 15 minutes
Software: 5 minutes
Processors
231