Configuring Lan Teaming - Fujitsu PRIMERGY RX4770 M1 Upgrade And Maintenance Manual

Basic software procedures
After replacing the Chassis ID EPROM, system information has to be entered
using the Chassis ID Prom tool. The tool and further instructions are available
to maintenance personnel from the Fujitsu Technology Solutions Extranet:
https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/
Ê Select your PRIMERGY system from the main area of the page.
Ê From the categories selection, choose Software & Tools Documentation.
Ê In the Tools area click Tools: Chassis-IDProm Tool to download the file
(tool-chassis-Idprom-Tool.zip).
I
For the Japanese market, follow the instructions provided separately.
Note on Cool-safe
I
If the Cool-safe
and has been enabled for your server, please set information within the
Chassis ID Prom Tool accordingly.
V
CAUTION!
Please note that you can only set the ATD flag. Resetting the ATD flag
using the Chassis ID Prom Tool is not possible!

5.2.17 Configuring LAN teaming

Use ServerView Operations Manager to obtain detailed information on existing
LAN teams:
Ê In ServerView Operations Manager Single System View select System Status
from the Information / Operation menu.
Ê Under Network Interfaces select LAN Teaming.
84
®
Advanced Thermal Design (ATD)
®
Advanced Thermal Design (ATD) option is available
The ATD option can only be ordered from the manufacturer
as a factory preset. To find out if your server is ATD-
enabled, check for the ATD logo on the identification rating
plate.
For further information on Cool-safe
Design (ATD), please refer to your server's operating
manual.
Upgrade and Maintenance Manual
®
Advanced Thermal
RX4770 M1