Engine Oil Change - Honda FRC800 Owner's Manual

ENGINE OIL CHANGE

Drain the oil while the engine is warm to assure rapid and complete
draining.
1. Place a suitable container below the engine to catch the used oil,
then remove the engine oil filler cap/dipstick, drain plug and sealing
washer.
2. Allow the used oil to drain completely, then reinstall the drain plug
and sealing washer. Tighten the plug securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of the used oil properly.
Put it in a sealed container and take it to a recycling center. Do not
discard it in a trash bin or dump it on the ground.
3. With the tiller in a level position, fill to the outer edge of the oil filter
hole with the recommended oil (see page
Running the engine with a low oil level is misuse can cause engine
damage. This type of damage is not covered by the Distributors
Limited Warranty.
4. Screw in the engine oil filler cap/dipstick securely.
DRAIN PLUG
ENGINE OIL FILLER CAP
SERVICING YOUR TILLER
32 ).
UPPER LIMIT
LOWER LIMIT
31